Octoplus JTAG PRO Software v.1.3.4 is out! Download Here! size : 31,83MB Sony Factory Repair feature has been released! You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported) This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing. Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing. Added support for the following models via eMMC: Samsung SM-A500FU – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J700F – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei G630-U10 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony D2303 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Sony D5503 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Sony D6603 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Added support for the following models via USB: OPPO A31 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Added possibility to set extended options for boot operation mode. From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode» Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG Pro software Octoplus card firmware has been updated to 2.5 version! To run Octoplus JTAG Pro Software v.1.3.4 and future versions, it is necessary to update card firmware. Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions Uploaded Full flash for Huawei G620S-L01 into the Support Area Uploaded new “Live logs” into the Support Area Added more detailed operations’ logging Improved work (parsing) with pit files All pinouts and Repair procedures described in the manual ("Help" button in the software) * Note: device should have non-damaged native TA; otherwise device will not be repaired
Medusa PRO v.1.3.4 Release Notes: Download Here! size : 31,77MB Sony Factory Repair feature has been released! You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported) This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing. Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing. Added support for the following models via eMMC: Samsung SM-A500FU – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-J700F – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Huawei G630-U10 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Sony D2303 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Sony D5503 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Sony D6603 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files Added support for the following models via USB: OPPO A31 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Added possibility to set extended options for boot operation mode. From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode» Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations To update firmware automatically, it is necessary to connect the Box and only then run the software. Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG Pro software Octoplus card firmware has been updated to 2.5 version! To run Octoplus JTAG Pro Software v.1.3.4 and future versions, it is necessary to update card firmware. Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions Uploaded Full flash for Huawei G620S-L01 into the Support Area Uploaded new “Live logs” into the Support Area Added more detailed operations’ logging Improved work (parsing) with pit files All pinouts and Repair procedures described in the manual ("Help" button in the software) * Note: device should have non-damaged native TA; otherwise device will not be repaired
Medusa PRO v.1.3.5 is out - Asus devices repair added! Download HERE! size: 31.60MB Medusa PRO v.1.3.5 Release Notes: - Added support for the following models via eMMC: Spoiler: detail Asus Nexus 7 (ME571K) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 5 (T00F) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 5 (T00P KL) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus Memo Pad 7 (K01A) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus FonePad (K012) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Nokia XL Dual Sim (RM-1030) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Nokia Lumia 635 (RM-975) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G3812 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. khurram136) Samsung SM-E500H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Added support for the following models via USB: LG US991 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 2 (Z00LD) - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files - Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported - Uploaded new “Live logs” in to the Support Area - Made improvements in Help and Pinout viewer - All pinouts and repair procedures are described in the manual ("Help" button in the software)
Octoplus JTAG PRO v.1.3.5 - Asus devices repair added! Download HERE! Size: 31.67 MB Octoplus JTAG PRO Software v.1.3.5 Release Notes: Added support for the following models via eMMC: Spoiler: detail Asus Nexus 7 (ME571K) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 5 (T00F) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 5 (T00P KL) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus Memo Pad 7 (K01A) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus FonePad (K012) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Nokia XL Dual Sim (RM-1030) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Nokia Lumia 635 (RM-975) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-G3812 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Samsung SM-E500H – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files Added support for the following models via USB: LG US991 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Asus ZenFone 2 (Z00LD) – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported Uploaded new “Live logs” in to the Support Area Made improvements in Help and Pinout viewer All pinouts and Repair procedures described in the manual ("Help" button in the software)
