mohon bantu cara ganti emmc meizu m2 mnngunakan easy jtag emmc sya pakai KMR820001M-B609 ini loog nya.. Z3X EasyJtag Software ver. 2.5.0.7 Loading eMMC Addon Firmware... IO: 1800 mV Box S/N: 1200E01DDA77F1C4, ,FW Ver.: 01.58 CMD Pullup Level:1660 mV CMD Active Level:1732 mV Box IO Level:1800 mV CLK Rate:14000 khz HiPower mode is off! ---------- eMMC Device Information ---------- EMMC CID : 150100523832314D42001ADDF44D12A0 EMMC CSD : D02701320F5903FFF6DBFFEF92404008 EMMC Manufacturer ID: 0015 , OEM ID: 0100 EMMC Date: 01/2015 Rev.0x0 EMMC NAME: R821MB , S/N: 450753613 EMMC NAME (HEX): 523832314D4200 EMMC ROM1 (Main User Data) Capacity: 14910 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.7 (MMC 5.0) Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: R821MB_ 450753613_20170422_1415.extcsd Searching for partition tables... Detected GPT over MBR... Medium UUID: 00000000-0000-0000-0000-000000000000 Warning: Entries Count = 26 MMCBLK0P0 (PROINFO) Range: [0X80000,0X77FE00] ,Len: 700000 MMCBLK0P1 (NVRAM) Range: [0X780000,0XC7FE00] ,Len: 500000 MMCBLK0P2 (DEVINFO) Range: [0XC80000,0XCBFE00] ,Len: 40000 MMCBLK0P3 (RSTINFO) Range: [0XCC0000,0X20BFE00] ,Len: 1400000 MMCBLK0P4 (PROTECT1) Range: [0X20C0000,0X2ABFE00] ,Len: A00000 MMCBLK0P5 (PROTECT2) Range: [0X2AC0000,0X34BFE00] ,Len: A00000 MMCBLK0P6 (LK) Range: [0X34C0000,0X353FE00] ,Len: 80000 MMCBLK0P7 (PARA) Range: [0X3540000,0X383FE00] ,Len: 300000 MMCBLK0P8 (BOOT) Range: [0X3840000,0X483FE00] ,Len: 1000000 MMCBLK0P9 (RECOVERY) Range: [0X4840000,0X5C3FE00] ,Len: 1400000 MMCBLK0P10 (LOGO) Range: [0X5C40000,0X643FE00] ,Len: 800000 MMCBLK0P11 (EXPDB) Range: [0X6440000,0X6E3FE00] ,Len: A00000 MMCBLK0P12 (SECCFG) Range: [0X6E40000,0X6EBFE00] ,Len: 80000 MMCBLK0P13 (OEMKEYSTORE) Range: [0X6EC0000,0X70BFE00] ,Len: 200000 MMCBLK0P14 (SECRO) Range: [0X70C0000,0X76BFE00] ,Len: 600000 MMCBLK0P15 (KEYSTORE) Range: [0X76C0000,0X7EBFE00] ,Len: 800000 MMCBLK0P16 (TEE1) Range: [0X7EC0000,0X83BFE00] ,Len: 500000 MMCBLK0P17 (TEE2) Range: [0X83C0000,0X88BFE00] ,Len: 500000 MMCBLK0P18 (CUSTOM) Range: [0X88C0000,0X288BFE00] ,Len: 20000000 MMCBLK0P19 (FRP) Range: [0X288C0000,0X289BFE00] ,Len: 100000 MMCBLK0P20 (NVDATA) Range: [0X289C0000,0X2A9BFE00] ,Len: 2000000 MMCBLK0P21 (METADATA) Range: [0X2A9C0000,0X2CFFFE00] ,Len: 2640000 MMCBLK0P22 (SYSTEM) Range: [0X2D000000,0X8CFFFE00] ,Len: 60000000 MMCBLK0P23 (CACHE) Range: [0X8D000000,0XA5FFFE00] ,Len: 19000000 MMCBLK0P24 (USERDATA) Range: [0XA6000000,0X3A2D7FE00] ,Len: 2FCD80000 MMCBLK0P25 (FLASHINFO) Range: [0X3A2D80000,0X3A3D7FE00] ,Len: 1000000 Done...Presets has been updated... Done. sdh write preloader,,tapi ttp matot
